Two-component adhesive is becoming an indispensable connection method for consumer electronics, automobiles, new energy, rail transit, construction, aerospace and other industries. Battery pack need to be sealed, structural parts need to be bonded, precision devices need to be sealed-the market's requirements for bonding strength, yield and production line efficiency only increase without decrease. In this process chain, it is not only the glue formula itself that really determines success or failure, but also a small parts that is often neglected: static mixer.

However, glue manufacturers are proficient in the formula system, but they may not know clearly how the internal geometric structure of the mixer tube affects the mixing uniformity; Equipment manufacturers are familiar with the operation and integration of dispensing equipment, but rarely delve into the selection logic of mixer tube, tolerance control and failure risk. The result is that the same glue has been changed to the mixer tube model, and the bonding quality is high and low; The glue waste and defect rate remain high; When engineers troubleshoot problems, the first suspect is always the formula, finally, it was discovered that the crux was in the mixed link-the wrong mixer tube was chosen. The cost was not only a few cents of consumables, but also the starting point of the chain reaction of yield, production capacity and customer complaints.

Good static mixer can be used at one time without cleaning, and can achieve uniform mixing of two components only by internal geometric structure. But to make good use of it, we need to understand several key variables-the difference of mainstream geometry, how to balance the three indexes of selection, the influence of rheological properties and pressure drop differences on the mixing effect, and how manufacturing tolerance determines consistency.

The global design and manufacturing expert of rubber cylinders, mixer tube and glue gun-medmis industry, can provide advanced hand-held adhesive and sealant mixing sizing system, which owns four brands of MIXPAC, MK,COX and QUADRO, products are widely used in production lines of many head manufacturing enterprises. From 14:00 to 15:00 on September 16, Jung's online class specially invited Yao Lijun, a senior application engineer in the Asia-Pacific region, to give a lecture, which will bring the rich experience accumulated by medmis over the years, systematically speaking to you who are having a headache for mixed problems!

Whether you are an adhesive formula R & D engineer or an dispensing equipment application engineer, this hour will help you fill in the missing link from "qualified formula" to "stable mass production line. Limited quota, click the link to sign up, online Q & A on the day of the live broadcast, and exquisite gifts!